Triad Wedge Welder - Attachment Kits
-
Hem Cord Attachment
The Hem Cord Attachment is used to produce a 1" weld width with a rigid or flexible cord or rope inserted within the hem. The material will be welded tight around the rope or cord. This weld finish is best used in extruded aluminum channels for construction of air structures, awnings, tents, truck covers, side curtains, screens, blinds, and digital print.The Triad uses its unique Front Guide to pre-position the cord and pre-fold the material for initial set up. The material passes through the Special Guide System to position the cord and material to complete the welding process. The Hem Cord Attachment includes:
1" Hem Wedge w/HeatersHem Wedge HousingHem Top Guide(1) Hem Cord Front Guide (specify size)(1) Hem Cord Outer (specify size)Note: Other sizes of Hem Front Guide and Outer Hem Cord Guide can be purchased separately.
The Hem Cord Attachment should be ordered according to size of cord or rope to be used. Sizes available are:
#33-105.18: Hem Cord Attachment, 240V, 3/32" - 1/4" Cord (3mm-6mm)#33-105.12: Hem Cord Attachment, 240V, 3/32" - 1/2" Cord (7mm-13mm)#33-105.58: Hem Cord Attachment, 240V, 9/16" - 5/8" Cord (14mm-16mm)#33-107.1.5: Hem Cord Attachment, 120V/240V, 1-1/2" Wedge (38mm)#33-109.2.0: Hem Cord Attachment 120V/240V, 2" Wedge (50mm) Axle Change Necessary -
Flat Hem AttachmentThe Hem Cord Attachment is used to produce a 1" weld width with a rigid or flexible cord or rope inserted within the hem. The material can be welded tight around the rope or cord. This weld finish is best used in extruded aluminum channels for construction of air structures, awnings, tents, truck covers, side curtains, screens, blinds, and digital print. In the welding area, the material passes through the Hem Cord Outer Guide to position both the cord and material and complete the hem cord weld. A unique front guide is used to position the cord and pre-fold the material as it enters into the Triad. The Hem Cord Attachment should be ordered according to size of cord or rope to be used.1" Hem Wedge w/HeatersHem Wedge HousingHem Top GuideHem Cord Front GuideFlat Hem Outer Guide(2) 2" Silicon Pressure Rollers w/hardware
At the welding area, the Flat Hem Outer Guide applies pressure to the fold of material against the side for the wedge to melt the thermoplastic. The larger pressure rollers complete the weld.
Once you own a Flat Hem or Hem Cord Attachment, you can accomplish the other type weld by simply adding an additional Guide and or Rollers. Similar parts interchange, no need to purchase another complete system. #33-104.1 (120V), #33-104.2 (240V)
#33-104.2: Flat Hem Attachment, 240V, 1" Wedge (25mm)#33-108.1.5: Flat Hem Attachment, 120V/240V, 1.2" Wedge (30.5mm) for 1.5" (38mm) finish#33-108.1.8: Flat Hem Attachment, 120V/240V, 1.5" Wedge (38mm) for 1.8"(48mm) finish -
Thermal Tape Attachment
he Thermal Tape Attachment provides for the proper positioning of our Thermal Bonding Tape to weld acrylic coated fabrics and other materials. This tested, proven method of welding acrylic coated fabric will produce overlap, hem cord, flat hem, and pocket welds with your existing Triad Wedge Welder.
The Thermal Tape Attachment Includes:
Thermal Tape Hanger AssemblyThermal Tape Flat Hem Outer GuideThermal Tape Hem Cord Outer GuideThermal Tape Wedge Housing + Top GuideThermal Tape Front Guide + Hem Cord Front Guide1.5" + 2" Silicone Pressure Rollers w/Hardware (2 qty)1" Hem Wedge w/HeatersUniseam FR Thermal Bonding Tape (1 roll)#33-090.2: Thermal Tape Attachment 240V, 1" Wedge (25mm) -
1" Thin Material Attachment
A unique attachment for welding thinner non-supported material from 5-10 mil thickness. Pre weld rollers and guides align material to help eliminate it from creeping. The Thin Material Attachment can only be used with the 1" Hem Cord housing and wedge.
-
Tube Guide Attachment
The Tube Guide Attachment will allow the fabricator to produce a specific size tube, on a continuous basis. Ideal for fabricating bladder bags, flotation tubes, ventilation tubes, filtration socks, sandbags, etc. The Tube Guide is adjustable from approximately 1.3" (31mm) to 11.5" (288mm) diameter and fabricates tubes in an automatic or stationary mode. The Tube Guide will retrofit to existing Triads and can produce tubes with standard wedge selection or the Hem Cord/Flat Hem Wedge Assembly.
Attach long rods and guide (included) for tubes of 4.5" (112mm) to 11.5" (288mm) diameter, approximate.
#33-450: Tube Weld Attachment
-
Ultimate Welding Attachment KitThermal Tape Attachment KitHem Cord Outer Guide 3/32"-1/4"Hem Cord Outer Guide 5/16"-1/2"Hem Cord/Flat Hem Wedge w/HeatersHem Cord Wedge Housing AssemblyHem Cord Front Guide 5/16"-5/8"Wedge Heater Lead BracketFlat Hem Outer Guide#33-092.2: Ultimate Welding Attachment Kit 240V
-
Vinyl Flat Hem and Hem Cord KitFlat Hem Attachment Kit 1"Hem Cord Outer Guide 3/32" - 1/4"Hem Cord Outer Guide 5/16" - 1/2"Hem Cord Front Guide 5/16" - 5/8"(2) 1-1/2" Rollers w/HardwareWedge Heater Lead Bracket#33-094.2: Vinyl Flat Hem & Hem Cord Kit 240V
-
Carriage for Curve Welding
#33-097: For both the Triad and Spec Welders, the Carriage for Curve Welding Attachment provides an easy means for turning to the right or left guiding the welder along a curved edge.
Finance Options Available - Click Here
Downloads
Triad Wedge Welder Attachment Kits BrochureIndustrial Welding Catalogue
Geosynthetic Welding Catalogue
Triad Parts Book
Triad Operators Manual